Side entry floating ball valve with anti blow out stem, antistatic device, and fire safe design, extended Bonnet design
Size: NPS1/2”to NPS8” (DN15 to DN200)
Pressure Rating: ASME Class150 to Class2500 (PN16 to PN420)
Body Material: Carbon Steel, Stainless Steel, Alloy Steel, Duplex Stainless
Seat: Soft, Metal to Metal
End Connection: RF, BW, RTJ
Operation: Lever, Worm Gear, Pneumatic, Electric, Hydraulic
Inspection and test: API 598
NDE: MT, PT, RT, UT are available
Design in compliance with: API 6D, ASME B16.34
Fire Safe design as per API 6FA and API 607
Temperature range:-101 to 450℃
Suitable for all types of fluids and aggressive environments including corrosive, sour (H2S), abrasive, and oxygen service; slurries and solid suspension in gases and air; and clean or dirty vapour (including steam).
Extended bonnet for the Insulation application
Screw glands are not allowed for ball valves above two inch nominal diameter; for sizes two inch and below, screw glands are not allowed for pressure ratings above class 300.
Ball valve screwed end insert is acceptable but not locked-open locked-closed insert.
Screwed insert are not allowed for pressure ratings above class 300 in all sizes.
Lifting lugs shall be provided for valves of nominal size 10 inches and larger.